When it comes to home improvement projects, a kitchen renovation can be one of your most important undertakings. Apart from the bedroom, the kitchen is
It sounds like the title of the newest horror film, but it’s just unused real estate in most homes. There are so many things you
Repost from Redfin: By Jenna Hall Picture your unfinished basement – a cold, dark, uninviting space that you have been wanting to finish for years.
It’s winter, but you decide you want to start a garden. You don’t have to wait until the ground thaws to start your spring garden.
Prepare a jumper wire approximately 8in long with a male quick disconnet terminal at one end and a test probe at the other end. Disconnect
Here’s a step-by-step to figure out the issue and fix it. Determine the unit has fuel. If the flame is present skip to step 6.
Remove the photocell from the heater and connect an ohmmeter on the 1000 OHM(RX1k)scale. Hold the lens up to a light source like an 80
Tools Required:5/16″ Nut Driver, #2 Phillips Screwdriver, Feeler Gauge, 0-15lb Pressure Gauge, Straight Blade Screwdriver Unplug heater Remove upper shell and plastic fan grill(if equipped)
Problem: The motor binds after replacing the rotor. Reason: Oversized Rotor or improper rotor gap. If the fan is hard to turn when the motor